ANALISIS PENGARUH VARIASI SUDUT SAMBUNGAN BELOKAN PIPA TERHADAP PRESSURE DROP ALIRAN PIPA

Authors

  • Tia Setiawan Universitas Galuh
  • Slamet Riyadi Universitas Galuh
  • Bayu Bayu Faisal Nugraha

DOI:

https://doi.org/10.33197/jitter.vol9.iss2.2023.1039

Keywords:

Connection, Bends, Pipe, Head loss, Pressure

Abstract

In the water distribution process, whether in industry
or housing, there are usually pipe bends. Every
pressure pipe that flows the fluid must experience a
head loss or energy loss. The amount of this loss is
influenced by several factors, including: diameter,
inlet and outflow, viscosity, and the angle of the arch
pipe connection. This study aims to determine the
effect of variations in connection points at pipe bends
on energy losses and pressure drops. To do this, the
research uses experiments with several types of turns
according to the conditions that occur in the field. The
results showed that the pressure drop was influenced
by the water discharge and the head loss of the pipe
flow. At the 45o
bend connection, the largest pressure
drop is at node 10, which is 0.7052 bar. While at the
30o turn connection, the biggest pressure loss is at
node 11 with a value of 8.5948 bar. And the last
turning connection, with a turning angle of 60o
, loses
pressure of 0.0042 bar

Downloads

Download data is not yet available.

Downloads

Published

2023-04-15

How to Cite

[1]
T. Setiawan, S. Riyadi, and Bayu Bayu Faisal Nugraha, “ANALISIS PENGARUH VARIASI SUDUT SAMBUNGAN BELOKAN PIPA TERHADAP PRESSURE DROP ALIRAN PIPA”, jitter, vol. 9, no. 2, Apr. 2023.

Issue

Vol. 9 No. 2 (2023)

Section

Articles

License

Copyright (c) 2023 Tia Setiawan, Slamet Riyadi, Bayu Bayu Faisal Nugraha

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

Submission of a manuscript implies that the submitted work has not been published before (except as part of a thesis or report, or abstract); that it is not under consideration for publication elsewhere; that its publication has been approved by all co-authors. If and when the manuscript is accepted for publication, the author(s) still hold the copyright and retain publishing rights without restrictions. Authors or others are allowed to multiply the article as long as not for commercial purposes. For the new invention, authors are suggested to manage its patent before published. The license type is CC-BY-SA 4.0.